If you’re military, a police officer, a reservist, a survivalist, or even just an outdoor enthusiast then you know the importance of having a good pair of tactical gloves to protect your hands, help you enjoy a better shooting experience and guarantee a full safety. When the going gets tough, they will help you get tougher. Our editors today will help to pick up the right one.
Not every survival situation is the same. You might find yourself in a hot and humid climate. You might find yourself climbing rocks, moving brush, or digging. You might find yourself engaging in hand to hand combat, or fighting off a dangerous animal. The one thing all survival situations have in common is that your hands are one of your number one most important tools. Protecting them is closely tied to protecting you, and that’s why tactical gloves are a good idea.
Best Tactical Gloves On The Market & Reviews
If you are in the market for tactical gloves, several important points should be considered in your search. The determining factors in glove selection are individual to the person. You should weigh each feature’s significance proportionately to your specific needs. Primary consideration should be given especially, to comfort, and the level of protection that gives. Do they help keep you safe from cuts, abrasions, and fire? Do they provide dexterity, durability, and value? Here’s our top 10 picks in the table below
|Oakley SI ASSAULT|
|63% Goatskin Leather |
|Mechanix Wear Tactical||TrekDry®|
|Hatch SOG-HK400||Goatskin leather|
Nomex®/ Kevlar® blend
|Tactical Hard Time||Goatskin leather|
|Rothco Hard Knuckle||Goatskin leather|
|Outdoor Research Piledriver||100% polyester shell |
Coated neoprene cuff
|Under Armour UA||Sheepskin leather|
|Fox Gen II||Aniline |
|StrongSuit 41500-L||50%Polyurethane |
These new khaki Oakley are rugged, well constructed, and durable. These gloves feature a full-grain leather palm crafted from the highly desirable Pittards® Tannery goatskin. The leather palm is form fitting, and true to size. There are small perforations to let air flow, and vacuum suction to form. Somewhat similar to golf glove technology. The Pittards® Tannery goatskin covers nearly all of the bottom surface of the glove, with the exception of two fingertips, the middle and the index.
Oakley SI Assault shooting gloves are extremely comfortable because of the detailed and smart design. For added air circulation, they have mesh, Airprene panels sewn in the wrist and rubber micro vent ports. Oakley’s patented Airprene material is a hyper breathable, welcomed component.
Even in hot or excessively humid climates, the air circulates well through these shooting gloves. The Airprene is a lightweight neoprene material very similar to what you might find in a medical support device like a sports brace. This material allows for a free range of motion while offering support, without causing your hands to overheat.
In addition to the Airprene, the cuffs of the wrists feature velcro. The velcro allows for a custom cinching fit, which is ideal when you’re trying to keep situational elements at bay. Water, dirt, bugs, glass or any number of creepy crawlies aren’t getting in these gloves. Great feature to have when you are in less than perfect situations.
This wrist closure makes the overall wearability of the glove better too. No bunching and shifting to contend with because of their pull loop design. For shooters this is paramount. The way the cuff is cut, coupled with the texture of them, makes these easy to take on and off quickly. In tactical situations, seconds count, and this feature is something to count on.
Now with all these top design features, these gloves already make for a great all around or general glove. They’re heavy duty, well constructed, and durable design has a lot of mass appeals. Everyone who has come to depend on tactical gloves from firefighters, to military personnel, to police officers will appreciate these rugged gloves. As will all preppers, outdoor enthusiasts and airsoft or paintball enthusiasts.
They have even more features to offer. Oakley SI just keeps on giving. They feature a hard knuckle design perfect for hand to hand combat, door breaching, and animal defense. The molded knuckle plates are made of a strong carbon fiber. The seams have a high level of craftsmanship going on too, four-way stitching holds it all together.
|High-quality materials & level of craftsmanship|
|Four point stitching|
|Velcro wrist closure & Airprene cuff|
|Easy application & breathable|
|Carbon fiber knuckles|
|Not touchscreen compatible|
|Higher end of budget|
|Extra knuckle padding would be nice|
|Trigger finger removal capability would be a great addition|
Mechanix tactical gloves have been around for a good long while, and the company’s name is synonymous with quality. Many of these manufacturer’s gloves were featured in the movie American Sniper, directed by Hollywood great Clint Eastwood. The story centers on a Navy Seal sniper, one of the deadliest in American history, Chris Kyle. These gloves, like Kyle, Eastwood and the military service men and women who depend on these are rugged.
The gloves feature a 0.8mm synthetic leather palm. The palm is good for tactile sensation without compromising strength and durability. The synthetic leather adds to the longevity of these gloves that have a history of standing the test of time. Put simply they’re well-crafted and made to last.
TrekDry® material is used throughout the design of these gloves for increased comfort and breathability. Mechanix tactical are very well-suited to hot and humid climate use. Hand perspiration is not a problem for the wearer. They have a great fit and feel to them. It feels nearly natural to have these on. These gloves offer an awesome range of motion. The attention to detail to the individual dexterity of the index finger is key too, because it is smaller, and allows for better articulation within the trigger guard. Add to that the double reinforced fingertips.
One of the cool features that sets these apart from the competition is the MultiCam® camouflage they are created with. It’s an interesting and effective technology. They exploit the workings of the human eye and subsequently how our brain interprets things like color shape, volume, and size.
Essentially how these camouflage works are, there is a small portion of the human eye that is responsible for the function of seeing color, the MultiCam® design tricks the brain into filling in more for the eye. The camouflage pushes the person’s natural primal function of assessing quickly for survival, by making them see the pattern as part of the background. In essence, it’s not so much a trick of the eye as it is a trick of the brain.
This scientific exploitation makes this pattern extremely useful, allowing the wearer to hide in plain sight. In tactical situations, that can be huge. Life or death huge. Traditional patterns utilize a contrast effect in an attempt to disguise the wearer. Contrast camouflage is not nearly as effective because in close range a low-resolution design will look unnatural and highly pixelated against most backdrops. MultiCam® does not contrast it blends.
The XRD® foam is padding to absorb vibration, abrasion, sticks, and impacts. This particular feature makes them ideal in both hands to hand combat and defense against dangerous predators. This design in the gloves is also useful for repelling with rope or climbing. It helps to lessen user fatigue too.
The manufacturer has implemented a design using Thermal Plastic Rubber (TPR) for the knuckle guard and protection of your fingers. It is durable, rugged and battle tough, just like you need to be when you find yourself in a survival situation. Now for the nitty gritty on the less desirable components.
|Durable synthetic leather|
|Snug fit offers good dexterity|
|XRD® foam padding for shock absorbance|
|Light material is comfortable and breathable|
|Impact Guard™ protects first knuckle with EVA padding|
|No cold weather protection|
|Not touchscreen compatible|
|Could use a better grip surface|
|Trigger finger removal design would be a nice addition|
These tactical gloves feature a durable aniline goatskin leather palm that has been treated to make it water-resistant. In the field that’s a highly useful feature, because moisture from perspiration and the surrounding environment is extremely hard to guard against. They will definitely keep your hands dry when it matters most.
These hatch operator 400 are heavily favored by police officers. With their superior resistance to cuts and abrasions, it’s not hard to see why. They are a very durable design. They feature an engineered protective material blend of Nomex®/Kevlar® that offer cutting edge burn resistance and toughness. Whether it’s an offender’s needles popping up during a pat down, or brambles in the middle of some remote jungle, these gloves have got you covered.
Hatch SOG-HK400 feature high-density foam for shock absorbency and full finger lateral protection. This is an exclusive design. The knuckles are leather covered and hard. If you have to throw down, you won’t be mowed down. The design of the knuckles helps to buffer sound making them ideal situations requiring stealth.
These are not your average run-of-the-mill wanna be gloves. They’ve been constructed with superior quality materials and design. You can tell a lot of thought, and clever engineering went into their development. The attention to detail is evident throughout. From the inseams in the palm allowing for better motion range, to the raised high abrasion areas on the finger sheaths at points of contact.
One of the most attractive and usable smart features you’re liable to ever come across in a tactical glove is the patented cut ring on the index finger. This unique and innovative feature allows the user the option of removing the uppermost part of the finger sheath on the trigger finger, without compromising the integrity of the glove. It creates the ideal situation for shot control. In most tactical survival situations you only get one shot, so it’s important to make it count.
Nomex® is known for its durability and flame retardant qualities. This engineered fiber grow thicker and carbonizes when it is exposed to extreme heat or fire. This increased protection creates a barrier between the user and the heat source. This unique feature allows the wearer more time to work or escape. Nomex® is said to be so durable that it can last up to five years under normal use. It’s not hard to see why these are a favorite of firefighters.
Kevlar® is a popular material used in the construction of many different gloves. What makes it desirable is its strength, resilience, durability, and flame resistance. Even oven mitts have been made out of this material for its thermal protection. Kevlar® is extremely cut resistant. In large part, it is because of the material, on an equal weight basis, is up to five times stronger than steel. That’s pretty amazing considering how lightweight the fabric is.
What do you get when you cross a superior engineered material with another superior engineered material? One of the best protective barriers available on the market. Nomex®/Kevlar® blended strengthen and fortify each other further. In a nutshell better thermal protection, better cut resistance, tear strength and
|Advanced abrasion, cut and burn resistance|
|Extremely well crafted and durable|
|Raised high abrasion protection points|
|Palm cut inseam design for increased dexterity|
|Not suited to extreme cold|
|No touchscreen compatibility|
|Not suited to extreme cold|
|Knuckle design could be more defined and offer more hit strength|
|Not as breathable as some competitive designs|
These Special Operations Light Assault Gloves (S.O.L.A.G.), have a whole lot going for them. These are one of the tops available on the market for their versatile, multi-feature, superior design. They are everything you could want in a tactical glove and then some. These gloves are on equal footing with the Hatch Operator HK. It’s easy to see how they are a situational survivalist favorite.
WR100X weatherproofing helps to combat moisture elements in your survival environment. Whether it’s water, chemical, or perspiration moisture, these gloves have you protected. Armortan® has been incorporated into the design of the palm. It’s sharing space with the premium English Pittard’s Tannery goatskin leather. This technology encases the leather in ceramic protection. Pretty new age smart. The dual palm layers offer up to 25% more abrasion protection than average gloves.
These S.O.L.A.G. feature an overwrap fingertip design. This offers a more desirable tactile feel than other gloves. The seam placement in these was a well thought out element. Joints receive added support because the seams add to the peripheral structure. Ergonomic leanings in the composition are evident, the cut on these brand are perfect. They fit incredibly well and are naturally curved.
The knuckles and fingers are afforded added protection because of the 4 mm pads incorporated in key areas of the gloves. Whether you encounter a dangerous assailant or animal in your survival setting, you’ll be ready to take them to task with these tactical shooting gloves.
The wrist cuff structure is fairly unique. These Blackhawk Hellstorms offer not one, but two adjustment areas for better user fit and water deterrence. One is on the wrist and the other on the back of the hand. This cinch draw capability is innovative and effective in tackling water immersion problems.
Blackhawk S.O.L.A.G offer the kind of protection that only a Kevlar® product can provide. They are cut abrasion, flash and flame resistant. This engineered super fabric is superior in last-ability too. Whether you find yourself in a knife fight or traversing rocky inclines, these gloves are built to protect you in almost every instance.
If you need to hook these to your bug out bag or want to attach them to a carabiner on your belt, it’s an easy thing to accomplish with the convenience of the nylon loop sewn into the gloves. The makers gave a lot of thought to all the devilish details that make one glove superior to the next. These hit all the must haves and want to haves easily.
If you’re looking for superior fit and functionality, with pricing that doesn’t require taking out a second mortgage on your house, these may be the gloves for you. They offer a lot of bang for your buck. Premium materials and premium construction for premium demands in tactical operation settings.
|Kevlar® incorporated in the design|
|Raised high abrasion area protection|
|Loop at wrist to attach to carabiner|
|Knuckle molds are not as hard as they could be|
|No detachable trigger finger|
|Not mobile device friendly|
|Does not really run true to sizing|
|Not the most breathable design tested|
It’s no wonder these gloves are hardcore. They were built in partnership with Ironclad Performance Wear, a brand with a reputation for tough construction. These are hard knock gloves for hard knock guys. There’s nothing moderate about their design, they scream bad to the bone, and they are. If you’re a part-timer just looking for a little outdoor hand protection, these may not be the best for you. These are pro level all the way.
Tactical hard time was designed with military, law-enforcement, and extreme tactical operators in mind. These aren’t just an average defenders glove. These walk the hard line of an offender’s glove. They’re designed to protect you when you lock horns.
What sets these gloves apart is their articulated thermoplastic knuckle plate design. The knuckle ridges feature a raised super hard design, that is split in the middle of the hand to allow for more natural movement and hitting situation. The padding covering the joints offers protection to the wearer when these hand to hand combat situations arise. Bottom line they’re going to give you more power per punch, and protection than some competitors.
The two piece split knuckle design features a TPR covering, to muffle and add an extra layer of protection and durability. These are not stuck proof. 5.11 tactical hard time are resistant like most on the market because of the leather palm. The goatskin leather is comfortable, conforming, and long lasting. Some officers report using these shooting gloves for well over a year before they see any wear in them.
The backhand panel is made of Kevlar®, so you know that you’re going to get your slash, burn, and cut protection also in these. The top of the hands are loaded with tendons and arteries, so that’s a critical place to have that coverage. If you find yourself in a situation where your hands are your only weapons you want to do your level best to protect their weakest spots.
The finger joints, seams, and facings are reinforced with heavy stitching, so they don’t give out on you. The fingertips feature a unique design that helps with tactile touch. Anybody who’s ever been in a position to use tactical gloves like these knows how important the “feel” is. It’s easy to see how these are a top pick for officers on domestic violence calls.The National Tactical Officers Association, or NTOA, had members test these brand.
|Durable and long lasting|
|Articulated TPR molded knuckles|
|Raised high abrasion areas|
|Velcro wrist closure for a cinched fit|
|Good dexterity and tactile feel|
|Breathable perforations incorporated in design|
|Sizing is off by a full size|
|No added grip on the palm|
|Not mobile device friendly|
These Rothco hard knuckle feature a material similar to Kevlar® to aid in burn resistance and cut and abrasion protection. This fabric panel is sewn into the top hand region of the gloves, the sides of the fingers, and also the tops.
The palm of these gloves is constructed using multiple layers of goatskin leather. The goat skin is a natural water repellent. The smart design features protective padding in the palm of the gloves, for added shock absorption, cut, poke, sting, are not stickand friction protection. These brand work well during a pat down becausare not stuckproof, they are highly resistant.
These are a hard knuckle glove. The knuckle plate is a well molded hard material, and a buffer of the goatskin leather on top. Whether you find yourself engaged in a street brawl, or you have a need to defend yourself against an animal, they offer excellent defensive as well as offensive protection.
There is a hook and loop closure at the wrist, for a secure closure. The same placement and these gloves were well thought out. They offer additional reinforcement to the areas of the hands that frequently experience fatigue during combat and survival situations.
The company had humble beginnings. This American-based company started in 1953 in a small loft on Great Jones Street, on the lower east side of Manhattan New York. The company founder Milton Somberg began Rothco, known then as Morris Rothenburg and Sons, to retail used military clothing, and World War II surplus. As the company grew, and supplies became scarce, they began manufacturing military gear themselves. This led to them becoming the largest American supplier of military equipment and clothing to the commercial market.
|Multi layered goatskin leather|
|Open cell foam padding|
|Fire resistant thermal protection material|
|Secure wrist closure|
|Split seam dexterity design|
|Hard raised molded knuckles for impact|
|Sizing is off by a full size, too small|
|Leather bleeds color|
|Not touchscreen compatible|
|Inferior stitching in comparison to others|
The palms of these gloves are a supple but durable full goatskin leather. The leather is reinforced in several spots with added support stitching too. Nice dexterity seams are incorporated throughout. Outdoor Reasearch Piledriver offers a fully tactile feel. They find the perfect balance between rugged durability and essential sensory perception. These gloves are naturally curved in the resting state, just like the human hand. This design creates a precise ergonomic fit.
The Outdoor Research Piledriver gloves even have some areas of raised padding. There is a large section of padding under the base of the fingers, where the hand is naturally padded, and another by the thumb. This smart design serves a dual purpose. The first is to increase the protection barrier from abrasion, pokes, or cuts. The other reason is the padding helps to seat magazines more comfortably, without injury to the palm.
There is an area of really well-vented fabric on the thumb which helps wick perspiration away from the trigger grip. The top of the hand panel is designed with this stretchy, mesh lined material for increased breathability. These are excellent hot climate gloves because of the materials selected by the manufacturer. Whether you find yourself in the field frisking, at the center of a full-blown tac operation, or are enjoying some recreational shooting, these gloves are a warrior worthy.
Many of the competitors offer hard knuckle design in their gloves. However, these are unique. They are constructed with a heavy grade carbon fiber. While most glove manufacturers use the standard one solid knuckle plate design, these do not. They are really ingenious in their approach. The gloves feature a raised two knuckle carbon fiber design which allows for better articulation, dexterity, and comfort during prolonged use. Other brands can become uncomfortable to wear after a substantial amount of time because the molded knuckles create friction on the wearer’s hand from natural movement.
These gloves are extremely easy to get on and off. They don’t have the restrictive elasticized fabric at the cuff opening like many others do. Instead the offer a large opening, double the size you need, and a pull tab. This feature is awesome and lets you throw these on at breakneck speed. Speed and preparedness are both huge in the world of tactical operations. It might sound cliché but in survival, seconds count.
Once you get them on, you cinch them tight with the velcro strap fastener located on the wrist base. A bonus is that one is less bulky and easier to pack than more traditional full plate knuckle designs. The pull strap loop design at the end of the wrist enclosure doubles as a point to attach them to a carabiner, to make packing them in and out easier. Once your brothers get a load of these gloves, attaching them to your pack might not be the safest option to carry them.
The design of this glove concerning durability, features, and longevity is already superior to other glove manufacturers. The company Outdoor Research sweetens the pot further by offering a lifetime product warranty, and they have a history of honoring it. With the high price point of professional tactical operator gloves, this is not only noteworthy but commendable. Outdoor Research, we have one word for you on standing by your product, no matter the branch, or the spelling, on behalf of all military tactical operators, present or past, Ooh-rah, Hooah, Hooya!
|Premium material construction|
|Ergonomically designed curvature|
|Extremely durable & Superior breathability|
|Added palm padding for magazine rest|
|Excellent tactile feel & Snug fit|
|Carbon fiber protection on raised abrasion areas|
|Not touchscreen compatible|
|Not effective in cold climate use|
|No additional grip on palm|
|No thermal or cut protection material on top panel|
The Under Armour tactical knuckle gloves are a somewhat lighter duty glove, although they are still a durable, full coverage option. They may not be as rough and tumble ready as some of their competitors, but they do bring something to the tactical market.
The balance over all of his glove is good. The back of the hand is vented which creates prime breathability and ventilation. The real sheepskin leather that they use on the upper portions of the glove has a nice feel to it. Sheepskin leather allows for good tactile sensation. These gloves are about as close as you can come in a tactical glove to feeling like your natural skin without a barrier.
These have excellent water repellency, which is important, and especially so in an operations setting. The wrist of these gloves is molded and offer a tight elastic like fit. Adding to the breathability and the design, there are some mesh vents, located near the upper portion of the wrist.
Under Armour feature a fairly new synthetic leather called AX Suede™. This synthetic leather is being used widely in the outdoor winter athletic market, because of it superior grip and water repellency. It is also a very resilient and durable new material. All the big-name manufacturers including Under Armour have been using this synthetic leather heavily.
Already vehicle control interfaces have been replaced by a number of military transports. Communications equipment, field instrumentation, and artillery controls have seen change as well. AX Suede™ may soon become the rule and not the exception.
The entire palm of these gloves is constructed with the synthetic leather. The palms offer multilayer versatility however because they also implement a silicone webbing for increased grip. The group has been ergonomically placed from the center of the palm to the second joint in the index and middle fingers.
This may look like an English gentleman’s driving or a motorcycle racing glove, but don’t let their refined look fool you. You will still be able to throw down with these. The design features a hard raised molded knuckle that packs a punch. The knuckle plate is covered with sheepskin leather that barely gives away what’s going on underneath.
You won’t be using these for heavy field operations because they’re not going to hold up like a more traditional tactical operator’s glove, but for most people, they’re enough to get the job done. The main negative is also one the main positives. The silicone grip on the palm of the gloves is not made to last it just doesn’t hold up. It’s a defect in manufacturing that a lot of other brands and cross use design experience. The other downfall to the school of design is that it doesn’t feature any thermal barrier or significant cut protection.
|AX Suede™ synthetic leather|
|Mesh vented fabric for breathability|
|Offers good dexterity|
|Good tactile feel|
|Inferior craftsmanship overall especially at seams|
|Palm grip separates too easily|
|Not as much ventilation as comparables|
|No secure wrist closure or loop|
If you’re looking for a general use hard knuckle tactical glove, these might be right for you. They’re multi-functional and can be used in a variety of settings, from recreational to professional. These gloves are pretty rough and tumble ready to rumble.
The palm is made of a durable aniline goatskin. It has quite a few reinforced seamed dexterity cut points. This design offers a good range of motion. The smooth coat leather offers natural water repellency, as well as a tactile feel. Added to the palm of these gloves is a significant amount of padded protection by the thumb. Three different areas of the surface of the palm are fortified altogether.
Fox Gen feature a cut an abrasion resistant material on the reverse of the hand. The material is also heat and flame resistant. This material has also been incorporated into the rest area. The wrist features a hook and loop closure and is trimmed with genuine leather. The strap pull feature at the wrist allows for a tightly banded fit which is ideal.
Fox Gen II, Hard Knuckle , feature a hand combat ready, raised molded knuckle in their design. These hard knock knuckles will protect you from people, dangerous animals, and rough, elemental environments. They are both a good offensive of and defensive feature. These gloves have a non-slip tip on the index, and middle fingers, which will help you with shooting grip should the need arise.
Whether you’re a recreational shooting sports enthusiast, airsoft aficionado, or a police officer who needs these gloves for the daily grind, these will do you just fine. They are well constructed. The choice craftsmanship is especially evident in the seam work. Because of the comfort, durability, and good craftsmanship, these are a popular general use glove outside of the tactical operator’s circle.
These are a full finger glove, they are primarily suited to warmer weather climates. If you find yourself out in the Arctic Circle, these aren’t the ones you are going to want to have in your pack. For the average Joe, these will get you at least three seasons coverage. These are pretty similar to the Hatch Operator gloves.
|Aniline reinforced goatskin palms|
|Genuine leather trim & Snug uniformed fit|
|Runs pretty true to size|
|Secure velcro closure & Good craftsmanship|
|Ergonomically inspired & Protective padding|
|Non slip Index and Middle fingertips|
|A little bulky in the fingers|
|No grip on palm|
|Not touchscreen compatible|
|Areas of added ventilation would be optimal|
While this glove will offer some general use protection, these were primarily made with the shooter in mind. That’s not at surprising considering their design was influenced by Top Shot All-Star finalist, and professional firearms instructor, Gary Quesenberry. The Enforcer TAC is Gary’s go to the glove of choice.
You might’ve read this time or two, and wondered to yourself why ergonomics matter. In this instance, to put it simply, it matters if you want a more comfortable form fitting glove. The human hand is not flat in its resting state. If you’ve ever paid attention to your hand when you place it on a flat surface and let it lay without applying pressure, it is naturally curved.
When a glove is designed to replicate that intrinsic curvature, they tend to fit and feel better. Obviously, when gloves feel good on your hands, you’re going to enjoy wearing them and get a lot of use out of them. So on a basic requirement level, these shooting gloves really hit that mark, where many others in the market don’t.
These are one of the lightest gloves available out there. That’s both good and bad depending on your perspective and intent. For a shooter, this ultra lightweight design is totally ideal. These are as close as you’re ever likely to come to a natural feel. They offer completely uninhibited total dexterity.
The palm material is TAC-Sense. The fabric on the back of the hand is the most breathable material you could hope for. No sweat inducing swamp cloth was used here. Not only will it keep your hands drier, but it will also keep them cooler. Perfect and a hot or humid climate. If you find that forehead perspiration becomes a problem, the makers of these gloves have you covered there too. They have incorporated a terry cloth sweat wipe in the design. Awesome feature.
The maker has given some thought to the features in the wrist area as well. There is a nice Velcro closure band for a tight cinched fit. That design is a nice touch because it allows the wearer to customize the feel based on their preference. Unlike some competitors in the tactical glove manufacturing market, this company has not neglected to add an attachment point for a carabiner. Not only have they added an attachment point to conveniently hook to your gear bag, they have opted out of the flimsy nylon string design that seems to be the norm. Instead, they feature a reinforced ring design on the pull tab portion of the wrist.
This company offers a huge variety of color options in this model. Everything from night camo like we have featured here, to pink camouflage. StrongSuit are a favorite of police officers, who typically buy the black model for daily use. They are not stuck proof, but they do offer the best tactile feel while providing a protection barrier. The downside to these gloves is they offer less in terms of protection and offensive or defensive strike enhancement and protection. They
will not protect you from thermal assault, nor jagged rock or the likes.
|Full dexterity & Uniquely lightweight|
|Designed by a professional shooting instructor|
|Terry cloth sweat wipe|
|Carabiner attachment point|
|Breathable fabric & True to size|
|Not mobile device compatible|
|Not cross use functional|
|Not a great cold weather option|
|No protective hard knuckles|
|Not fire, or cut resistant|
Tactical Gloves Buyer’s Guide To Choose The Right Pair
Are you searching for the best one? You’re not alone. Tactical gloves are so versatile, it is no wonder there are so many different types and brands on the market. Whatever you need them for, this guide will help you find the right pair for you. I’ll tell you everything you need to know. Then you will be ready for whatever adventure awaits!
1. Determining Your Budget
Tactical gloves are available in all different levels of quality. You want to make sure you don’t spend more than you need to, but also spend enough to get a pair that are durable and will meet your needs. Take a look at the reviews for the gloves that you are interested in. They often have lots of information on how the gloves fit and perform. Additionally, some companies offer free returns or exchanges if the gloves do not fit or they are just not what you expected. Sometimes, though, it is better to spend a little bit more to ensure you are getting a quality product. If you buy a pair of gloves that is a few dollars cheaper but obviously not as well-constructed, you will most likely have to replace them much sooner. That can easily cause you to blow your original budget. However, there are plenty of good, durable shooting gloves available for a reasonable price, so as long as you do a little research you shouldn’t have any problems.
2. Identify Your Needs
Think about what you will be doing most often with your shooting gloves. This will help you decide which pair is best for you. Do you want them mainly for working on cars? In that case, you may want to look at the ones that are more flexible. On the other hand, if you want them for riding on an ATV or motorcycle, you may want to consider gloves with hard knuckles for more protection. If you want them for a little extra warmth and grip when you’re out hunting, you may want to think about getting a camouflage, olive drab, or a tan pair of gloves. If you need to use a smartphone or tablet, make sure you get them touch screen compatible. You may also want to think about what kind of weather you will be wearing your shooting gloves in. If you plan on using them mostly in hot weather, there are heat-dissipating and moisture – wicking types of tactical gloves, as well as half-finger gloves available. If you’re going to use them mostly in the winter, you may want to look at the brands with some insulation. No matter your wants and needs, be sure to consider them all before deciding which
pair brands to buy.
3. Make Sure to Buy the Right Size
Tactical gloves are somewhat adjustable, but if they are way too tight or too loose they won’t work the way they should. Many companies have a size chart so you can be sure you get the right fit. To measure your hand place the end of a soft tape measure around the middle of the palm of your dominant hand. Wrap it all the way around, and you’ll know your hand size. If you’re still not sure, you can order 2 different sizes and send back the pair that doesn’t fit. If you do that, make sure the company offers free returns. Additionally, they are available in men’s, women’s, and unisex sizes, so make sure to choose the right size for you.
4. Check the Construction
Since you are spending time and money to find the right pair of shooting gloves, make sure that they will hold up over the long term. If you are shopping online, look closely at the photos and compare them with other brands. Oftentimes customers will even upload their own photos. It is also a good idea to read the reviews of the brands you are considering. If there are many reports of gloves falling apart at the seams, for example, then it probably is a fairly common problem. Some companies have warranties for their products, but they usually are only for a few months. This will protect you against factory defects. However, if the gloves last a few months past the warranty period and then fall apart, you probably will not get your money back. This is why it is important to do your best to make sure the ones you buy are going to hold up.
5. Know How To Take Care of Your Gloves
Tactical gloves are made out of various different materials, so their care requirements vary as well. It is important that you know how to clean and take care of your new pair. The last thing you want to do is damage your gloves by cleaning them the wrong way. Some shooting gloves are machine washable, but most need to be air dried to maintain their shape. Unless the care instructions for your new gear say otherwise, never use bleach or other harsh chemicals to clean them. Specific care instructions come with them, and companies usually have this information on their websites as well. No matter what the process, cleaning them is usually pretty simple, so it’s not anything to worry about once you know how to do it.
Whether you’re heavy combat, or a light Ops guy, there’s a perfect pair of tactical gloves out there that will be suited to what you need them for. Some gloves on the market are pro use all the way, while others are more compatible with recreational use. No matter what walk of life you come from, or your level of experience, or involvement in situational operations and survival, they are a good tool to have on standby. Most people who wear them swear by them, and wear them daily because of it.
Professionals have come to depend on them heavily like military personnel, police officers, firefighters, and even mechanics. The reason is simple, it’s better to be proactive in protection than reactive, and there’s no retroactive when things go wrong. We hope our guide has helped you to narrow down some great options in tactical operator’s gloves. We wish you good fortune and success in all your tactical endeavors, whatever they will be, and most importantly, may someone always have your six.